Dolomite has a hardness of 3.5-4 and a specific gravity of 2.85-2.9. It is widely distributed in nature. Dolomite is a carbonate mineral, including iron dolomite and manganese dolomite. The color of dolomite is generally off-white, similar in appearance to limestone. Generally called dolomite refers to the purer dolomite with a calcite content of less than 5%.
Dolomite Processing Technology
- Crushing: large pieces of material are crushed by the crusher to the fineness of the feed material (15mm-50mm) that can enter the mill
- Grinding: Small pieces of material that meet the conditions for entering the mill are uniformly and quantitatively fed into the grinding chamber of the mill through the feeding system, and ground into powder in the grinding cavity.
- Classification: the ground material will be classified by the classifier along with the airflow of the system. The unqualified powder will be classified by the classifier and then returned to the main machine grinding cavity for re-grinding.
- Powder collection: The powder that meets the fineness enters the powder collection system through the pipeline with the airflow, and the gas and powder are separated. The finished powder is sent to the finished product silo by the conveying device, and then is packaged by a powder tanker or an automatic baler.
Dolomite Grinding Mill
Dolomite Fineness And Application
Fineness | Applications | Recommended Equipment |
Below 200 meshes | Used to produce putty powder and additives of fodders( Calcium content is above 55.6 and no harmful ingredient exists.) | MTM Trapezium Mill MTW Trapezium Mill |
250-300 meshes | Used as raw materials of plastic, rubber, coating, waterproof material plants and wall coatings(whiteness is above 85.) | |
350-400 meshes | Used to produce pinch plate, water pipe and chemical products (whiteness is above 93). | XZM Ultrafine Mill |
400-600 meshes | Used to produce toothpaste and soap (whiteness is above 94). | XZM Ultrafine Mill LUM Ultrafine Vertical Mill |
Above 800 meshes | Used to produce rubber, plastic, cable and PVC (whiteness is above 94). | |
Above 1250 meshes | Used as raw materials of PVC,PE, paint, coating, bottom & surface coating of papermaking and ink, etc. |