What Are The Reasons For Blocking Of The Dolomite Mill

2020-06-20

The milling production line is a project with complicated process and large investment. Affected by various factors, the dolomite milling production line sometimes shows signs of blockage, which greatly affects the smooth and stable progress of the dolomite milling operation. So, what are the causes?

1. The particle size of the dolomite material is too large: In the dolomite milling processing production line, each type of dolomite milling equipment is equipped with a corresponding feeding requirement for the feeding device port. If the particle size of the dolomite material is too large Large, beyond the requirements of the feeding device, there will be a phenomenon of jamming material blocking, affecting the smooth operation of the next process of the mill operation;

2. Improper operation method: In order to increase the output of the dolomite powder production line, some users feed too fast and the amount of feed is too large when feeding the equipment. In the case of uneven feeding, it is easy to cause dolomite The processing capacity of the grinding equipment can not keep up with the feed speed, so that a large amount of dolomite material is accumulated in the grinding chamber, which increases the difficulty of the work of the dolomite grinding production line, and it will inevitably cause blocking phenomenon for a long time;

3. The blade is seriously worn: In the production of dolomite powder, the main role of the blade is to shovel the material, and then it is projected between the grinding roller grinding rings at a set angle. In this process, the blade is the part that directly contacts the material. If the blade is severely worn, it will not be able to better shovel and throw the material, resulting in a large amount of material that cannot be fully ground, thereby forming a blockage;

4. Grinding roller grinding ring wears seriously: under the condition that the equipment is under high load for a long time, it is inevitable that the grinding roller grinding ring has different degrees of wear. Once the grinding roller grinding ring wears seriously, it will greatly reduce the dolomite The production capacity of the pulverizer has resulted in the blocking of the dolomite pulverizing production line.

Dolomite for produce coarse powder Solution:LM series: